What tire pressure should I run after installing new wheels and tires?
Always inflate your new tires to the pressure recommended by your machine manufacturer, which can be found on the driver side door jamb placard. Avoid going by the maximum pressure listed on the tire sidewall, check your pressure regularly, and always reinflate after airing down for off-road use.
Correct tire pressure is critical for performance, safety, and tire longevity on your ATV or UTV. Here are general guidelines:
Follow the tire manufacturer's recommendation: The tire sidewall or manufacturer's specification sheet will list the recommended operating pressure range. This is your primary reference.
General ATV/UTV starting points:
- Most ATV and UTV tires operate in the 6-15 PSI range -- significantly lower than street vehicle tires
- Trail riding: 8-12 PSI is common for most all-terrain setups
- Mud/bog riding: Many riders air down to 4-6 PSI (beadlock wheels recommended at these pressures)
- Sand dune riding: Often 4-8 PSI depending on the sand conditions and whether you are using paddle tires
- Hard terrain / rocky: 10-15 PSI for better puncture resistance and handling precision
Check your owner's manual: Your ATV or UTV manufacturer's specification for stock tire pressure is a good baseline. If you have upgraded to significantly different tires, use the tire manufacturer's guidelines instead.
Always re-check tire pressure after the first few rides on new tires, as they can seat and settle slightly. Questions about the right pressure for your specific setup? Contact our team.